How Lenders and the SBA Use Your NAICS Code on Loan Applications

The six digits on a loan application set your SBA size test, can trigger extra reviews, and feed bank risk and reporting systems. What the code decides, what it doesn't, and how to keep it consistent.

Loan officer at his desk meeting with a business owner
In this guide
  1. Where the code shows up in a loan file
  2. SBA 7(a) and 504 loans: the code sets the size test
  3. Codes that trigger extra SBA steps
  4. Ineligible businesses are defined by activity, not code
  5. How banks use the code
  6. Why a mismatch slows a loan down
  7. If your industry is considered higher risk
  8. Worked example: an HVAC contractor buying its building
  9. Sources

Lenders ask for a NAICS code to identify your industry. On an SBA 7(a) or 504 loan, that code picks the size standard you must meet and can trigger extra steps such as an environmental review; banks also use it for risk ratings, concentration limits and regulatory reporting. The code does not decide whether your type of business is eligible for an SBA loan, because eligibility turns on what you actually do. The safest code is the one that matches your tax return and describes your main source of revenue.

Where the code shows up in a loan file

Document or systemWho fills it inWhat the code is used for
SBA Form 1919 (7(a)) or Form 1244 (504)Applicant”Primary Industry / NAICS Code (6 digit)” field on page 1
Tax returns and IRS transcriptsApplicant; lender verifiesThe business activity code the SBA forms must match
Size determinationLender or CDCPicks the industry size standard, unless the alternative standard is used
SBA loan system entryLenderMust be the same code used to determine size
Environmental investigationLenderCodes of the property’s current and past uses, checked against SBA’s sensitive-industry list
Credit memo, risk rating, concentration reportsLenderIndustry analysis and portfolio limits
Section 1071 small business lending dataLenderA 3-digit NAICS code reported to the CFPB

Both SBA forms say: “For purposes of reporting NAICS Code, Applicants must match the business activity code provided on their IRS income tax filings, if applicable.” The versions on SBA’s site are dated 02/2025, and SBA says it is updating its forms for SOP 50 10 8.1 (effective October 1, 2026), so use the version your lender provides.

SBA 7(a) and 504 loans: the code sets the size test

An SBA borrower must be small, counting affiliates. For 7(a) and 504 loans there are two ways to qualify (13 CFR § 121.301(b)):

TestWhat is measuredRecords the lender verifies
Industry size standardReceipts or employees against the standard for your primary NAICS code (13 CFR § 121.201)Last 3 years of tax returns
Alternative size standardTangible net worth of $20 million or less and average net income after federal income taxes (excluding carryover losses) of $6.5 million or less for the two completed fiscal years before applying, including affiliatesLast 2 years of tax returns

The alternative figures come from an SBA final rule (89 FR 11703, February 15, 2024, effective March 18, 2024) that adjusted the 2010 statutory standard for inflation. It helps a business that is over its industry standard on receipts but has modest net worth and profit. Pass-through entities compute net income as if they paid corporate tax (§ 121.301(b)(2)).

Other size rules tied to NAICS:

  • Primary industry. SBA weighs how receipts, employees and costs split across your activities in the last completed fiscal year (13 CFR § 121.107). See can a business have more than one NAICS code.
  • Affiliation by subsector. Under § 121.301(f), when a majority owner of the applicant also owns more than 50% of another business in the same 3-digit NAICS subsector, the two are affiliated.
  • Timing. Size is fixed on the date SBA accepts the application; later growth doesn’t affect that loan.

The size table in force took effect March 17, 2023. SBA proposed revisions in August 2025 and August 2026, but proposals don’t apply until a final rule takes effect. For receipts averages and affiliation, see SBA size standards explained.

Codes that trigger extra SBA steps

SBA’s lending rulebook, SOP 50 10 8.1, uses NAICS codes as triggers:

  • Environmental review. When real estate is involved, the lender identifies the NAICS codes of the property’s current and known past uses and checks them against Appendix 6, SBA’s list of environmentally sensitive industries. A match means the review starts with a Phase I environmental site assessment, whatever the loan size. The list includes automotive repair (8111), dry cleaning, fabricated metal manufacturing, and gasoline stations (457), which also have their own appendix.
  • Program limits. The export and international trade loan programs exclude subsector 721 (accommodation) and 457, and Export Working Capital also excludes 722. Other 7(a) loans remain available.
  • Manufacturer terms. The MARC working-capital program is limited to sectors including 31-33 and 42, and 504 manufacturers in sectors 31-33 get a higher project limit and a looser job-creation ratio.
  • Expansion vs. new business. A second company with identical owners in the same 3-digit code, borrowing jointly with the first, counts as an expansion.

Ineligible businesses are defined by activity, not code

13 CFR § 120.110 lists businesses that can’t get SBA loans: passive landlords and developers, lenders, life insurers, pyramid sales plans, businesses earning over a third of revenue from legal gambling, illegal activities, speculative and lobbying businesses, and others. None is defined by NAICS code. On marijuana, the SOP puts it plainly: “The nature of the business’s specific operations determines whether a business is eligible.” For example:

  • A residential landlord in 531110 is generally a passive business. A property company leasing to an eligible operating business can qualify under the Eligible Passive Company rules (§ 120.111).
  • A hotel in 721110 is eligible only if more than 50% of the prior year’s revenue came from guests staying 30 days or less.
  • A shop in 459991 isn’t ineligible because of its code, but one selling products mainly intended or marketed for marijuana use is ineligible under any code.

A different code can’t make an ineligible business eligible; it only puts a false description on a federal form.

How banks use the code

Conventional lenders aren’t bound by SBA size standards, but they still use the code:

  • Underwriting and risk ratings. Industry is one input in credit analysis; lenders compare your margins and leverage with industry peers. SBA’s SOP, for example, requires the credit memo for a MARC loan to state the business’s NAICS code.
  • Concentration limits. Banks cap exposure to any one industry. The OCC’s Concentrations of Credit handbook (version 3.0, September 2026) says industry concentrations are “usually identified” by NAICS code. A bank near its limit for your industry may decline a loan that otherwise qualifies.
  • Section 1071 reporting. The CFPB’s small business lending rule, revised May 1, 2026 (91 FR 23530), requires a 3-digit NAICS code for each application from a business with $1 million or less in gross annual revenue. It covers lenders with at least 1,000 such originations in each of two consecutive years, with compliance starting January 1, 2028. Lenders may rely on the code you supply, so your code is often the one reported.

Community Reinvestment Act small business loan data is built around loan size, location and borrower revenue, not industry codes.

Why a mismatch slows a loan down

SBA lenders reconcile your financials with IRS transcripts before first disbursement (7(a)) or before the debenture is funded (504), and they read registrations, credit reports and your business description. When the code disagrees with the rest of the file, someone has to resolve it:

  • The return shows a different code. If your business changed, explain it; the lender will ask which code reflects the last fiscal year. Some IRS codes are broader roll-ups, not six-digit NAICS industries; flag that and let the lender decide what goes into SBA’s system. See NAICS codes on your tax return.
  • The code doesn’t fit the description. “Commercial HVAC installation” next to a residential remodeling code raises questions about the business and its size standard.
  • The code changes the size answer. Lenders may accept your size information unless “credible evidence to the contrary is apparent.” A mismatched code can be that evidence, and the correct code may have a lower standard.
  • Old records. Bank profiles, Dun & Bradstreet and state records often carry stale codes. Fix them before applying; see how to change your NAICS code.

A business too new to have filed a return should use its planned main revenue activity; see choosing a NAICS code for a new business.

If your industry is considered higher risk

Some industries get extra scrutiny, because SBA rules add steps (hotels, fuel, cannabis-adjacent retail, the environmental list) or because a lender’s credit policy rates them higher risk. Don’t pick a blander neighboring code. Form 1919 warns that knowingly false statements to obtain an SBA-guaranteed loan are punishable under 18 U.S.C. 1001 and 1014, and a wrong code is easy to spot against the tax return or a site visit. Instead:

  1. Use the accurate code and explain the mix. If 30% of revenue comes from a lower-risk line, show the numbers.
  2. Bring industry documents. Transient-occupancy figures for a hotel, lab certificates for hemp products, environmental reports or tank records for a property with fuel or repair history.
  3. Ask about the lender’s appetite. Industry limits differ by bank; a lender or CDC that already serves your industry is often faster.
  4. Check the size test early. Look up your code, confirm on sba.gov, and ask about the alternative standard if you’re over.

Worked example: an HVAC contractor buying its building

Harbor Mechanical, an S corporation that installs and services commercial heating and cooling systems, wants a 504 loan to buy the building it rents. Its Form 1120-S lists 238220, so it enters 238220 on Form 1244 (see the plumbing and HVAC page).

  • Industry standard: 238220’s standard is $19 million in receipts. Harbor’s five-year average is $21.4 million, so it fails.
  • Alternative standard: Tangible net worth is $7.8 million; two-year average net income, recomputed as if taxed as a corporation, is $1.3 million. Both are under the limits, so the CDC qualifies Harbor under the alternative standard using two years of returns.
  • Affiliates: The majority owner also owns 60% of a sheet-metal shop in 332322, a different subsector, so the same-subsector rule doesn’t apply. The CDC still checks the other affiliation rules; any affiliate’s net worth and income would be added.
  • Environmental: Harbor’s code isn’t on SBA’s list, but the building was a general automotive repair garage until 2015, and 8111 is. The review starts with a Phase I.

Had Harbor copied 236118 from an old bank profile, its application would have contradicted its tax return and been measured against a $45 million standard that doesn’t fit its work.

Sources

For a specific activity, browse the code finder and compare the official descriptions and exclusions.

First published October 27, 2026. Last reviewed October 27, 2026.

naicscodes.org is an independent reference, not a government agency. Program rules change; confirm anything you file with the agency that administers it. Spotted an error? Tell us — see our editorial policy.

Keep reading

All guides