NAICS Codes and OSHA Recordkeeping: Exemptions and Electronic Reporting

How OSHA uses each establishment's NAICS code, together with headcount, to decide whether you keep injury logs and which forms you submit through the Injury Tracking Application.

Stacked white, blue and yellow hard hats on a construction site ledge
In this guide
  1. Two exemptions: company size and industry
  2. Electronic submission thresholds under 1904.41
  3. Decision table
  4. Which NAICS code applies to an establishment
  5. Which NAICS edition OSHA’s lists use
  6. Worked examples
  7. Benchmarking with BLS injury rates
  8. Common mistakes
  9. Sources

OSHA uses your NAICS code twice. First, it decides whether an establishment has to keep the OSHA 300 Log, 300A Summary and 301 Incident Reports at all: low-hazard industries listed in 29 CFR 1904 are partially exempt, and so is any company with 10 or fewer employees. Second, the code and the establishment’s headcount decide what you must submit online each year through OSHA’s Injury Tracking Application (ITA): the 300A only, or the 300A plus case data from the 300 and 301. The code that counts is the code of each establishment, and OSHA’s lists use older NAICS editions than the 2022 code you may know.

Two exemptions: company size and industry

The size exemption (29 CFR 1904.1) looks at the whole company. If the company had no more than 10 employees at any time during the last calendar year, counting every location, it does not have to keep OSHA injury and illness records. One week at 11 employees ends the exemption for the next year.

The industry exemption (29 CFR 1904.2) looks at each establishment. If an establishment is classified in an industry group listed in non-mandatory Appendix A to Subpart B, “Partially Exempt Industries,” that establishment does not keep the records. A company can therefore have one location that keeps a 300 Log and another that does not.

The list uses four-digit NAICS industry groups, so it covers every six-digit industry inside them. It is mostly retail, finance, professional services, education, outpatient health care and food service. Examples include 5412 (accounting and payroll services), 5415 (computer systems design), 6211 (offices of physicians), 6244 (child day care), 7221 (full-service restaurants) and 8121 (personal care services). Nearby industries are often not on the list: 6216 home health care services and 8111 automotive repair are absent, so establishments in them keep records.

Both exemptions are partial. Every covered employer still has to report a work-related fatality to OSHA within 8 hours, and an in-patient hospitalization, amputation or loss of an eye within 24 hours (29 CFR 1904.39). An exempt employer must also keep records if OSHA or the Bureau of Labor Statistics asks in writing, for example through the BLS survey described below.

Electronic submission thresholds under 1904.41

Establishments that keep records may also have to submit data electronically. The current rule took effect January 1, 2024 (88 FR 47254, July 21, 2023), and the eCFR text as of October 2026 shows no later amendments. Submissions are due March 2 of the year after the data year, so 2026 data is due March 2, 2027. The ITA keeps accepting late submissions for the current cycle through December 31.

  • 20 to 249 employees, industry in Appendix A to Subpart E: submit the 300A. Appendix A covers whole sectors such as agriculture (11), utilities (22), construction (23), manufacturing (31-33) and wholesale trade (42), plus selected retail, transportation, health care, accommodation and service groups.
  • 250 or more employees, any industry that must keep records: submit the 300A.
  • 100 or more employees, industry in Appendix B to Subpart E: submit the 300A and also case data from the 300 Log and 301 reports. Appendix B is a narrower list of higher-hazard groups, such as 2381 foundation, structure and building exterior contractors, 3327 machine shops, 4841 and 4842 trucking, 4931 warehousing, 6221 hospitals and 6231 nursing care facilities.

Employee counts work differently here. These thresholds apply to the establishment, not the firm. OSHA’s rule counts each individual employed at the establishment at any time during the year, including part-time, seasonal and temporary workers, so this is a headcount, not full-time equivalents. An establishment that meets the criteria but had zero injuries still submits a 300A showing zeros. Submissions must include the establishment’s EIN and a legal company name. A corporate office may submit for all of its establishments.

Decision table

Start with the company size test, then work through each establishment separately.

Establishment situationKeep 300, 300A, 301Submit 300A to ITASubmit 300 and 301 data
Company had 10 or fewer employees all of last yearNoNoNo
Industry group listed in Appendix A to Subpart BNoNoNo
Records required, fewer than 20 employeesYesNoNo
Records required, 20-249 employees, industry not in Appendix A to Subpart EYesNoNo
Records required, 20-249 employees, industry in Appendix A to Subpart EYesYesOnly if 100+ and in Appendix B
Records required, 100+ employees, industry in Appendix BYesYesYes
Records required, 250+ employees, any industryYesYesOnly if in Appendix B

The “No” answers assume no written notice from OSHA or BLS. Most State Plans apply the same submission rules to private employers. OSHA notes that Minnesota requires more establishments to submit, and state and local government employers should check with their State Plan. OSHA’s ITA Coverage Application runs the same test for a single establishment.

Which NAICS code applies to an establishment

The establishment is OSHA’s unit. Part 1904 defines it as a single physical location where business is conducted. For dispersed work such as construction and trucking, it is the office, terminal or station that supervises the work or that crews are based at, not each job site. The ITA FAQ says to choose the six-digit code for the activity that produces the most revenue for the establishment, or that employs the most people, whichever is more applicable.

That code can differ from the one on your tax return or SAM.gov profile. A manufacturer’s corporate office that mainly manages its plants is classified in 551114 Corporate, Subsidiary, and Regional Managing Offices. Its group, 5511, is on the exempt list, while its 332710 machine shop is in Appendix B. See establishment vs. company classification for how headquarters, warehouses and branches are coded, and how to find your NAICS code for the method itself. Section 1904.2 also says you may contact your nearest OSHA office or State Plan for help classifying an establishment.

Which NAICS edition OSHA’s lists use

The lists were written in different years, so they use different editions.

List or systemWhat it decidesNAICS edition
Appendix A to Subpart BPartial exemption from keeping records2007 industry groups (2014 rule, effective January 1, 2015)
Appendices A and B to Subpart E300A and 300/301 submission2017 (updated by the 2023 rule)
Your ITA establishment profileThe code OSHA records for youAny valid six-digit 2012, 2017 or 2022 code
BLS SOII injury ratesBenchmarks2017 through 2024 data; BLS schedules 2022 NAICS from 2025 data

OSHA’s FAQ states that a later change to an industry’s code number does not change its reporting status. In practice, translate your current code back to the edition of the list before you compare. The 2022 changes list gives the 2017 code for each 2022 industry. Retail moved the most in 2022, so check it there first:

Your 2022 codeOlder code to compareStatus
722511 Full-Service Restaurants722110 in 2007 (group 7221)Partially exempt
456110 Pharmacies and Drug Retailers446110 (group 4461)Partially exempt
457110 Gasoline Stations with Convenience Stores447110 (group 4471)Partially exempt
513210 Software Publishers511210 (group 5112)Partially exempt
445131 Convenience Retailers445120 (group 4451)Keeps records; Appendices A and B
459510 Used Merchandise Retailers453310 (group 4533)Keeps records; Appendices A and B

Restaurants show why this step matters. Since 2012, full-service and limited-service restaurants sit in group 7225, which is not on the exempt list, but their 2007 groups 7221 and 7222 are. Some 2022 retail codes also absorbed former online retailers (2017 code 454110), which were neither exempt nor on either submission appendix. If your establishment came from a split or merged code, compare the code that described it before the revision. If the answer is still unclear, ask OSHA. Background is in NAICS 2022 changes explained.

Worked examples

A restaurant group with a catering kitchen. A company runs four full-service restaurants with about 40 employees each and a separate catering kitchen (722320 Caterers) that employed 60 people over the year. The company has more than 10 employees, so the size exemption is out. The restaurants are partially exempt as 2007 group 7221. The catering kitchen is in 7223 Special Food Services. That group is not exempt and appears in Appendix A to Subpart E, so the kitchen keeps a 300 Log and submits its 300A. 7223 is also in Appendix B, but the kitchen has fewer than 100 employees, so it does not submit 300 or 301 data. The restaurant and catering pages cover the code choices.

A roofing contractor. A roofer (238160, group 2381) works from one office and yard. It kept 80 year-round employees and hired 30 seasonal workers for the summer. That is 110 individuals during the year. Group 2381 is in Appendix B, so the establishment submits its 300A and its 300 and 301 case data by March 2. Counted as full-time equivalents, the same workforce would look like fewer than 100. That is why the headcount rule matters. The roofing page compares roofing with other exterior trades.

Benchmarking with BLS injury rates

The BLS Survey of Occupational Injuries and Illnesses (SOII) publishes injury and illness rates by NAICS industry. OSHA used those rates to build both the exempt list and the submission appendices. A randomly selected employer that receives a SOII form must complete it, even if it is normally exempt (29 CFR 1904.42).

To benchmark, compute your rate the BLS way: recordable cases × 200,000 ÷ total hours worked by all employees. The 200,000 represents 100 full-time workers for a year. Then compare it with the rate for your industry at the most detailed level BLS publishes. The rate for all private industry was 2.3 cases per 100 full-time workers in 2024. BLS also publishes quartile distributions by industry and establishment size, which are better for small employers. Until the 2025 data, SOII tables use 2017 NAICS, so translate a 2022 code first. Other industry datasets are covered in free industry data by NAICS code.

Common mistakes

  • Applying the size test per location. The 10-employee exemption counts the whole company. The submission thresholds count each establishment.
  • Applying the industry exemption company-wide. A company’s 8121 salons may be exempt while its cosmetics plant (3256) keeps records.
  • Using the tax-return or SAM.gov code. OSHA needs the code of each establishment’s own activity.
  • Searching a 2007 or 2017 list with a 2022 code. “Not listed” may only mean the number changed.
  • Entering a four-digit code in the ITA. The ITA requires a valid six-digit code.
  • Treating “exempt” as “no OSHA obligations.” Severe-injury reporting, BLS survey letters and written OSHA requests still apply.
  • Skipping the 300A because nothing happened. Covered establishments submit zeros.
  • Picking a code to avoid reporting. Classification follows the establishment’s primary activity. If the case is close, document your reasoning or ask OSHA.

Sources

For a specific activity, browse the code finder and compare the official descriptions and exclusions.

First published October 27, 2026. Last reviewed October 27, 2026.

naicscodes.org is an independent reference, not a government agency. Program rules change; confirm anything you file with the agency that administers it. Spotted an error? Tell us — see our editorial policy.

Keep reading

All guides